Ptc creo guide9/6/2023 ![]() If that is the default, you don’t need to change anything. Here you’ll want to make sure that your scale is set to 1:1. Now select the “Scale” category on the left side of the dialogue box. Click “Apply” to ensure it is the correct view. Usually, either the FRONT or RIGHT view is the one you need. Under the “View Type” category, you’ll need to cycle through the list of views until your part is in the correct orientation. You should also have the “Drawing View” dialogue box on your screen. Then select DEFAULT ALL and click “OK.” Step 5: Open “Drawing View”ĭouble click your mouse anywhere in the large blue box and your part should appear. ![]() Select the “General View” option in the toolbar. Now you’ll be presented with a blank window with a blue box on it. There is no harm in making the template too large. If necessary, select the variable option and change the dimensions as needed. Then change the orientation and size to ensure that the width and height listed at the bottom of the dialogue box are larger than the footprint of your part. Under “Specifying Template,” select the “Empty” option. Name the drawing and select “OK.” Step 3: Adjust template size With the part you want to export open, click “File”, then click “New” Step 2: Create new drawing Export in PTC Creo from Start to Finish Step 1: Open new file
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |